Department 17
Marine Incinerator Systems Service & Repair
Certified technical support, burner overhauls, combustion control automation, refractory brick relining, and MARPOL Annex VI emission compliance for commercial shipboard incinerator plants.
MARPOL Compliance: Ensuring proper thermal disposal of oily sludge, bilge cake, and solid waste to prevent Port State Control detentions.
Incinerator Maintenance & Refractory Solutions
Burner & Sludge Dosing Systems
- Primary and secondary diesel ignition burner overhauls and nozzle renewals
- Heavy waste oil and sludge burner atomizing air nozzles and heating block maintenance
- Sludge dosing pump overhauls, progressive cavity pumps, and strainers
- Ignition electrodes, high-voltage transformers, and flame safeguard programming
Refractory Relining & Casting
- Primary combustion chamber and flue gas duct high-temperature refractory brickwork
- Castable refractory repair, anchor pin welding, and ceramic fiber insulation blankets
- Chamber door gasket replacements and thermal insulation barrier renewals
- Controlled curing schedules following major brickwork restorations
Automation, Safeties & Draft Controls
- Combustion chamber pressure transmitters, draft fans, and damper actuators
- High-temperature thermocouples (PT100, Type K) and optical flame scanners
- PLC control program debugging, touch panel HMI repairs, and relay logic
- Safety shutdown interlocking testing (high flue gas temp, negative pressure loss)
Supported Manufacturers & Models
- TeamTec: GS500, GS1000, OG200, OG400 series
- Atlas Incinerators: Maxi, Titan, and Colossus series
- MIAO (Nanjing Luzhou): CY-F and CY-SF series
- Kangrim: KHI series marine incinerators
Book Marine Incinerator Repairs or Refractory Service
Experienced incinerator technicians ready for 24/7 technical boarding across Middle East, Mediterranean, and Asian hubs.